Porsche runs two bolt patterns depending on model. Get this wrong and the wheel will not go on. It is the single most important thing to check before buying Porsche fitment alloys and most guides online gloss over it entirely.
Here is the complete picture, with what we carry and what fits what.
Bolt pattern: 5x130 vs 5x112
The 911, Boxster, Cayman and older Cayenne (9PA, 92A) run a 5x130 bolt pattern. This is a Porsche-specific pattern not shared with any other manufacturer, which is why Porsche alloys tend to command a premium — the market is smaller and more specific.
The Macan (95B, J1) and the newer Cayenne (9Y0/9YA from 2018) run 5x112 — the same pattern shared with Audi, Volkswagen, Mercedes and most of the German premium segment. This opens up significantly more design choice at a lower price point.
Our Porsche fitment alloys
All four are on the 5x130 pattern, covering the 911, Boxster, Cayman and older Cayenne.
- 22x9.5 Porsche Style Alloy Wheels — 5x130 — a wide-body fitment in the larger diameter. Suits the Cayenne Turbo and Cayenne GTS where the arches support the extra width. Silver finish.
- 22x9.5 Porsche Style Alloy Wheels — Gunmetal — same specification in Gunmetal. Works particularly well on the Cayenne S in Mahogany and the older 92A in Jet Black Metallic.
- 22x10 Porsche Style Alloy Wheels — 5x130 — a wider face on the same diameter, for the Cayenne Turbo S and Cayenne Coupe where the rear arches take a wider fitment. Check your specific build before ordering.
- 22x9.5 Porsche Style Alloy Wheels — 5x130 variant — an alternative five-spoke design on the same spec. Worth comparing side by side if you want something that reads slightly differently to the standard Porsche turbine look.
Macan and newer Cayenne buyers
If you have a Macan or a 9Y0/9YA Cayenne, your bolt pattern is 5x112 and you have access to our full Audi and VW fitment range as well. The offset is different — the Macan typically runs ET21 and the Cayenne ET59 — so check carefully. Message us on WhatsApp with your registration and we will confirm before you order.
Centre bore and spigot rings
The 5x130 Porsche centre bore is 71.6mm. Most aftermarket alloys will need a spigot ring to close the gap between the hub and the bore. Every listing on our site tells you whether rings are required and which diameter to order. Do not skip this — running without rings causes vibration and can damage the hub.
Delivery
All wheels dispatched next working day. UK mainland 3 to 4 working days. Northern Ireland and Ireland next day. EU customers — including Germany, France and the Netherlands where Porsche ownership is extremely high — pay no customs duty and no import VAT. We ship from Northern Ireland which stays inside the EU single market for goods.
Use code WHEELSFREE at checkout for up to £40 off your delivery.