Which Alloy Wheels Are Right For My Car?

When it comes to choosing the alloy wheels suitable for your car, you can meet a lot of “strange” information and “weird” numbers which explain the alloy wheels fitment. If you experienced this and haven’t got a clue what the numbers are, you’re reading the right article…

Here at OMÏ Alloy Wheels we can get you through and explain your needs and expectations regarding your new set of wheels.

First of all, you can rely on our knowledge based on years of experience and secondly, we do not pretend that we know everything. It’s not to be ashamed that we don’t know something and we always strive to get desired information from reputable sources and pass them on to you.

There are some simple examples that most of you know already, i.e:

  • Audi alloys do not fit Jaguar
  • Range Rover 22” will be too big for a Volkswagen Golf

Yes, they are quite obvious, but will Range Rover wheels fit BMW 3 series?
Well, this will depend but here is where all the “weird” numbers come in. We will try to explain in the example below:

We’ll take 19” wheels and compare both vehicles

Range Rover Sport 3.0 TD, 2015 

  • PCD: 5 x 120 
  • ET: 44.5 
  • Rim width: 7.5J 
  • Centre bore size: 72.6 
  • Tyre size: 235/65/19 

BMW 3 series F30, 2015*

  • PCD: 5 x 120*
  • ET: 36 and 47*
  • Rim width: 8J and 8.5J*
  • Centre bore size: 72.6*
  • Tyre size: 225/40/19 and 255/35/19

Now these numbers show that if you change tyres to correct size you could fit Range Rover wheels on BMW 3 series F30!

Here’s why:

  • PCD – The Pitch Circle Diameter (PCD) is the diameter of the circle which passes through the centre of all the studs so there are 4 or 5 studs on cars and 120 is how many mm (roughly) is between first the third stud. Range Rover and BMW has the same PCD

  • ET – called “Offset” is the measured distance from the wheel’s hub mounting surface to the centre line of the wheel. It lets you know how much the wheel will stick out from the hub mounting surface. Basically the smaller offset the more outside the wheel is mounted towards the wheel arch. Higher ET number results in moving the wheel location deeper into the wheel arch. You can get the offset lower or higher compare to your standard alloys but the difference shouldn’t be high. How many mm? It really depends on each individual example but in this case we are somewhere in between. ET44.5 vs ET36 and 47. BMW has got staggered fitment which means the rear wheels are wider hence different width and offset.
  • Rim width – I think that’s pretty much clear. All wheels have their width measured but it’s important not to measure the whole wheel width but only the width between lips of the wheel (please see pic below). So in our example we would fit 7.5J rim instead of 8J and 8.5J (wider on the back). Because offset is higher on the front wheels they should go more inside the wheel arches but the rim is narrower by half an inch so will be around in the same place. Rears are an inch wider originally on 3 series (8.5J vs 7.5J) so in this example an inch is quite a big difference (offset very similar) and spacers would be advised so the wheel will not go too much inside of the wheel arch. We will talk about spacers too, don’t worry… 
  • Centre bore size: Another very important number to measure. It is the size of the centre hole in the middle of the wheel covered by centre cap and measured in mm. If the centre bore of the wheels is smaller than that of your car (or current wheels) the wheels will not fit your car. If the bore is larger than that of your car (or current wheels) you will need spigot rings to fill the gap in between. Spigot rings – plastic rings easily reachable. In our example the size of the centre bore is exactly the same so the wheels will go straight on.
  • Tyres size – so we’ve got last thing that will be explained more in detail in different article but in this case the profile (65) is way too big to fit onto 3 series (40 and 35) so tyres would need changing.

This is quite an extreme example and there’s not many Range Rover wheels fitted on BMW 3 series but it’s only to show that you wouldn’t think the wheels from large vehicle would also fit different brand and much smaller car.These are the “weird” numbers that make the wheels fit even though at first they shouldn’t.

So please get in touch with us as we’re here to help so if you have any questions to ask regarding whether the new wheels are right for your car or not don’t hesitate to call us.

VIA & JWL tested and approved alloy wheels

VIA & JWL tested and approved wheels

All our wheels are tested for Impact, Dynamic cornering fatique and Dynamic radial fatigue.

Meaning that any wheel you buy from us comes with a VIA- and JWL- worldwide certification.

No additional duties or taxes for European shipping

No additional duties or taxes for European shipping

We ship our wheels from Northern Ireland, this way we can offer our European customers the lowest prices + super fast shipping without any hidden cost.

Disclaimer

Our products are aftermarket replacement wheels, they are not from the original brands. 

Our wheels are not affiliated with Audi, BMW, Ford, Ferrari, Jaguar, Lexus, Mercedes, Porsche, Range Rover, Skoda, Tesla or Volkswagen. The terms "Audi, BMW, Ferrari, Ford, Jaguar, Lexus, Mercedes, Porsche, Range Rover, Skoda, Tesla or Volkswagen" and any associated automobile models are used for fitment and descriptive purposes only. OMI Alloy Wheels Limited states that our use of the trademarked terms in our product titles & descriptions constitute fair use and nominative use and is in no way to offer confusion that OMI Alloy Wheels Limited products and Audi, BMW, Ford, Ferrari, Jaguar, Mercedes, Lexus, Porsche, Range Rover, Skoda, Tesla, or Volkswagen products are related or their companies.

Shipping

Yes, we ship all over the world. Shipping costs will apply, and will be added at checkout. We run discounts and promotions all year, so stay tuned for exclusive deals.

It depends on where you are. Orders processed here will take 5-7 business days to arrive. Overseas deliveries can take anywhere from 7-16 days. Delivery details will be provided in your confirmation email.

We use all major carriers, and local courier partners. You’ll be asked to select a delivery method during checkout.

Product

We always aim for make sure our customers love our products, but if you do need to return an order, we’re happy to help. Just email us directly and we’ll take you through the process.

It depends on the creator and the product. All options are outlined on the product page, so look out for customization options there.

Other

You can contact us through our contact page! We will be happy to assist you.

Customer support

Send a message

''We excel in delivering top quality products, at unbeatable prices and ‘second to none’ customer service''

Alexander
Director - OMI Alloy Wheels Limited